Parameter Table of One-component silicone sealant for automobile
| Model |
Features |
Appearance |
Proportion |
Dry time min/25℃ |
Hardness Shore |
Tensile strength MPa≥ |
Dielectric strength kv/mm≥ |
Temperature |
| 2586 |
Thixotropic
|
black
|
1.55±0.05 |
20 |
30±5 |
1.0 |
5.0×1014 |
-40～200 |
| 2588 |
Thixotropic
|
red
|
1.55±0.05 |
20 |
30±5 |
1.0 |
5.0×1014 |
-40～200 |
| 2599 |
Thixotropic
|
silver
|
1.55±0.05 |
20 |
30±5 |
1.0 |
5.0×1014 |
-40～200 |
|
Directions for use:
|
1, the surface clean99ing: remove with a clean cloth and solvent to be sizing of surface dust, oil, etc., so that clean and dry.
2, the sizing: the glue evenly pushed to the surface has been cleaned, parts assembly, proper positioning of the components stack merge.
3, the cure: the sealing components or assembled naturally cured in air. Curing outside to the inside, generally 24 hours curing depth of 2 ~ 4mm, 6mm sealant depth be fully cured more than 7 days, the temperature, high humidity is cured rapidly. When the glue has been solid early, and to ascertain follow-up without external damage, it can be under the procedures.
4, the operation is complete, unused plastic cap should be tightened immediately, kept under seal. Again, if the seal a little crust, its removal can not affect the normal use and performance. |
| Note: |
The depth of bonding\potting shall not be more than 6mm; |
|
